Keywords: screwdriver , hammers , spanners , wrenches , pliers , safety tools , non-sparking tools , hand tools ...
Ordinary hand tools, usually made of steel, can produce sparks if struck, scratched or dropped, which can be catastrophic. Explosive atmosphere. Tools used in hazardous materials incidents must be made of non-sparking, non-ferrous, non-magnetic, corrosion-resistant metals. Botou non-sparking, non-magnetic and corrosion resistant hand tools conform to international standards.
In general, Non Sparking Wrench should be used in any environment where an ignition source is present. Applications include, but are not limited to:
Maintenance and repair operations (MRO)
Collection, Holding and Transfer (CHT)
Working in confined spaces
Transportation (airports, railroads, tankers, shipyards), chemical, petrochemical and natural gas operations
City, state and federal government (utilities, waste management, HazMat, WMD)
General dust environments (grain, mining, paper/pulp mills)
Non-sparking safety tools are required and/or recommended by many federal agencies including: OSHA, Department of Energy (DOE), National Fire Protection Association (NFPA), Mine Safety and Health Administration (MSHA), National Institute for Occupational Safety and Health (NIOSH), Supervisor of Shipbuilding and Maintenance (SUPSHIP), etc.
Non-sparking, non-magnetic, corrosion resistant
Recommended for hazardous environments where flammable or combustible vapors, liquids, dust or residues are present
High strength nickel-aluminum bronze alloy
Pipe wrench jaws have super-hard beryllium copper alloy inserts for added strength
American Type Offset Slogging Box Wrench
The Difference Between Non-Sparking Tools And Anti-Static Tools
Diagonal pliers are mainly used to cut wires and excess leads of components.
Toolkits are an essential part of a technician's job, so they can sometimes be underestimated. Having access to the right tools enables you to do your work professionally, and most importantly, safely.
The cutting forces when machining titanium alloys are only slightly higher than steel of equivalent hardness, but the physical phenomenon of machining titanium alloys is much more complex than machining steel, making the machining of titanium tools extremely difficult.
Brass is an alloy metal that is made of copper and zinc. Due to brass's unique properties, which I'll go into more detail on below, it is one of the most widely used alloys. Because of its versatility, there are seemingly endless industries and products making use of this alloy.