Diagonal pliers are mainly used to cut redundant leads of wires and parts. They are also commonly used to replace general scissors for cutting insulated bushing and nylon tire wire cards.
The cutting edge of diagonal pliers can be used to cut rubber or plastic insulation for flexible wires. The cutting edge of the pliers can also be used to cut wires. When cutting No.8 galvanized iron wire, the blade should be cut back and forth several times around the surface, and then the wire should be broken only with a gentle pull. It can also be used to cut hard metal wires such as wire and steel wire. Electricians often use specifications such as 150, 175, 200, and 250mm. It can be purchased according to the needs of internal or external work types.
The jaws of the pliers can also be used to tighten or loosen nuts. The correct way to use diagonal pliers is to hold the palm downwards and hold the palm upwards. The palm downward grip method is to hold the grip of the diagonal pliers with the thumb of your right hand and the other four fingers of the right hand, let the blade of the diagonal pliers move forward, and cut the target forcefully.
When using diagonal pliers, make sure that the pliers face down to prevent injury from the cut thread. In addition, flat jaw pliers cannot be used to cut hard objects such as thick steel wires and screws to avoid damage to their jaws. It is strictly forbidden to use flat-nose pliers with damaged plastic covers to cut live wires to avoid electric shock and ensure personal safety.
The person who uses the tool must be familiar with the performance, characteristics, use, storage, and maintenance methods of the tool. The use of pliers is right-handed. Turn the jaws of the pliers inward to control the cutting part of the pliers. Place your little finger between the two grips, press the grip, and open the head of the grip to separate the grip flexibly.
Diagonal pliers blades can be used to cut rubber or plastic insulation for cords. The blade of the pliers can also be used to cut wires and iron wires. When cutting No. 8 galvanized iron wire, use a knife to cut back and forth around the surface several times, and then just gently pull the wire off. Kushiguchi can also be used to cut hard metal wires such as wires and steel wires. Electricians usually have a variety of specifications. It can be purchased according to the needs of internal or external work types. The teeth of the pliers can also be used to tighten or loosen nuts. Diagonal pliers are a kind of small hardware tools, also known as "diagonal pliers". It has the most extensive functions and is an indispensable tool in people's daily life and work.